The Motogadget mo.Relay is a very compact relay able to operate almost all appliances.

High or low beam, horn, ignition, etc. can be switched easily and almost lossless. Higher current loads are put closer to the appliance (e.g. lights). Ignition lock and/or handlebar switch only have to bear a minimal pilot current load. Failures and burned contact pins are a thing of the past!
Due to minimized conductor loss, e.g. beam brightness is significantly increased - additional safety! 

A central threaded bore on the upper casing surface allows for easy mounting to any place, even if mounting multiple mo.Relays. The mo.Relay casing is turned from a solid aluminium block and anodized black. It is completely watertight and vibration resistant.

Diameter: 19 mm (without cable)
Height: 19 mm

Please note:

These are NOT for indicators/ turn signals. 

The mo.Relay is NOT suited to act as a push-button control unit! Please refer to the mo.Unit. 

The mo.Relay is NOT suited to act as a flasher relay! Please refer to the mo.Unit, mo.Stop or (with additional push-button control unit) mo.Relay+.