mo.wave Indicator Relay

The mo.wave is the world's first digital flasher relay with fade-in/fade-out effect. Furthermore, it is very compact and load independent.

Every flasher light model is faded in and out smoothly - even LEDs! Brand new style and looks for your turn signal.While conventional hard switching flashers - especially LED models - only switch on and off blandly, your mo.wave oscillates in a fascinating wave pattern.

Flasher lights in a revolutionary new design - ultra compact and light. Basically just a piece of wire with a tiny candy-sized device. Ideal to draw more attention to all kinds of modded or styled motorbikes and cars.

Attention: If you are looking for a flasher relay with automatic deactivation please refer to our mo.stop series.

Dimensions: 

Casing (L x W x H): 18 mm x 13 mm x 9.5 mm
Connector cable length: approx. 2 x 50 mm
Weight: approx. 4 g

Notes:

a) The M-Wave substitutes a conventional flasher relay. This flasher relay is usually implemented BEFORE the indicator switch.
The most convenient way to mount the M-Wave is to simply locate and replace the original relay.

b) The M-Wave CANNOT replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.

c) Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules CANNOT be replaced or complemented by the M-Wave.

All advantages summarized

• Unique fade-in/fade-out effect
• Ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device  
• Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
• The wiring can be placed into the handlebar or frame tubes or into the wiring harness
• Almost load independent (min. 1 Watt)
• Completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts
• Constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights, as well as all 10 watts and 21 watts turn signal lights
• E. g. works with 4 turn signal lights or 2 handlebar end turn signal lights
• Immediate loss-free and brighter illumination of all turn signal lights
• Utterly hassle-free connection using only two cables - just connect in series
• Completely watertight and vibration resistant because of the moulded-in construction
• Short circuit proof, automatic overload protection, switches power up to 100 W.
• No heat generation while operating
• Only 5 - 18 V operating voltage required
• Also applicable for 6 V turn signal lights
• Quality 'made in Germany' - by Motogadget