With this set you can make your own design plexiglass led light. By cutting the plexiglass into the desired shape and gluing the led strip behind it, you can create a unique rear light yourself. 

With sandpaper you can roughen the surface of the plexiglass. Tip is where it is rough it will transmit light. Where it is smooth, it does not. This allows you to create special effects. 

The set includes:

1 x a plexiglass sheet of 8mm thick and 200mm x 200mm wide and long. 

1 x a jigsaw

1 x a transparent glue especially for plexiglass

6 x one LED with one position of brightness 12V 1 plus wire and 1 minus wire. So watch out, no brake light. You can think of a creative solution yourself. 

How do you work? 

You cut the plexiglass into the desired shape. You can be as creative as you like.

You glue the pieces of plexiglass together.

Then you roughen up a part of the plexiglass on the back, and you glue the ledstrip with the lighting side against the plexiglass.

Try to get it closed around the ledstrip. You can do this with tape or black kit so that as little light as possible escapes and everything shines through the plexiglass... where you want it to shine. 

Then where you roughen up the plexiglass by sanding, light will shine. 

You connect the wires to your bike and you can try it out.